DIY: Extend your USB CABLE using UTP Cable/Network Cable

Posted on at


INSTRUCTION:

  1. Green wire from Usb Cable (D-) Connect to Green wire of UTP Cable.
  2. White wire from Usb Cable (D+) Connect to White-Green of UTP Cable.
  3. Red wire from USB Cable (+5v) Connect to Orange + White-Orange of UTP Cable.
  4. Lastly, Black wire from USB Cable (Ground) Connect to Brown + White-Brown of UTP Cable.
  5. So the excess Blue and White-Blue either cut or make it reserve.



About the author

Kicko

Computer Technician, Dancer and Choreographer.

Subscribe 0
160